Selecting A Tonematch® Preset; Adjusting Zeq - Bose T4S ToneMatch Notice D'utilisation

Operation
Selecting a ToneMatch® Preset
The ToneMatch function allows you to select a ToneMatch preset for your instrument or microphone.
This proprietary technology optimizes system equalization to preserve the natural sound of your specific
instrument or microphone. They are organized into categories and independently selected for each channel.
Rotate the Category control to access the list of categories and highlight your choice.
1.
Press the Select control to select your choice, or press the Cancel control to exit the list with no change.
2.
3. If you pressed Select, rotate the Preset control to access the list of presets and highlight your choice.
4. Press the Select control to select your choice, or press the Cancel control to exit the list with no change.
Ch 1 ToneMatch
Vocal Mics
Handheld Mics
Category

Adjusting zEQ

The zEQ function is part of the ToneMatch preset technology. It allows you to adjust low/mid/high
frequencies that are within the range of your instrument or microphone.
To adjust zEQ, rotate the control under the corresponding frequency band.
Note: To bypass an individual frequency band, press the corresponding control. Press it again to activate.
22 - English
Ch 1 ToneMatch
Utility
Flat
Preset
Category
Rotate
Preset
Rotate
Utility
Vocal Mics
Electric Guitars
Acoustic Guitars
Select
Press
Handheld Mics
Headworn Mics
High Gain: Bright
High Gain: Normal
Cancel Select
Press
Ch 1 zEQ
Handheld Mics
Low Mid High
0.0db 0.0db 0.0db
Cancel
Ch 1
Vocal Mics
Headworn Mics
Category
ToneMatch
Preset