Delete Readings From The Device - IEM Tel-O-Graph GSM Mode D'emploi

Note
Previously transmitted data is retained in the database and is not overwritten.

Delete readings from the device

To clear the memory on your blood pressure monitor, proceed as
follows:
1. Press and hold the
monitor for about 3 seconds.
 The display shows [IP].
Note
The display automatically shows each menu entry for 3 seconds. The display order is:
▪ Mobile network transmission (IP)
Infrared transmission (Ir)
▪
Delete measured values (c lr)
▪
button on the blood pressure
Memory
Fig. 11: Delete measurements
DE
EN
35