Properties I Technical Data; Properties; Technical Data - Kemper KHS VAV-PLUS Instructions D'installation Et D'utilisation

1

Properties I Technical data

1.1

Properties

Figure 686 01 I 686 05
 Parts having contact with fluid are made of gunmetal and stainless steel as well as for drinking
water approved elastomers and plastics
 Removable `Top Entry` interior head part
 KHS-PLUS maximum flow isolating ball valve DIN-/DVGW approved according to DIN EN 13828, W 570
 Pressure-impact free operation, transit time for 90°, open 90 sec, closed 15 sec.
 Pressure stage PN 16
 Free from dead spots
 2-point control
 With position feedback (24 V DC)
 Drive can be positioned on the valve in 45° steps
 Manual operation possible
 Valve closes during power failures
1.2

Technical data

Description
Torque
Hold torque
Transit time for 90°
Voltage
Power consumption
Rotate angle
Permissible ambient temperature
Permissible ambient humidity
Protection class
Operating noise
Drive weight
Feedback
Connection cable
14 / 52 – K410068601001-00 / 01.2021 – © www.kemper-olpe.de
Figure 686 01
Open 90 sec. I Closed 15 sec.
24 V (+/- 20 %) DC
2,5 W
< 85 % relative humidity without condensation
1,3 kg
Position feedback 0...10 V
0,9 m, 4 x 0,75 mm²
Figure 686 05
7 Nm
7 Nm
230 V~ (+/- 10 %), 50 Hz
2,6 W
90°
Up to 55 °C
IP54
< 30 dB(A)
1,2 kg
1,2 m, 2 x 0,75 mm²