Harkortstraße 5; 57462 Olpe Tel.: +49 2761; En 50581; En 60730 - Kemper KHS VAV-PLUS Instructions D'installation Et D'utilisation

EN
Content
Safety instructions
1 Properties I Technical data
1.1 Properties
1.2 Technical data
1.3 Dimensions
1.4 Materials
2 Installation
3 Connection as a 2-point controller
4 Maintenance
5 Spare parts list
6 Wiring for KEMPER KHS components
with electrical connection
Manufacturer's address
Gebr. Kemper GmbH + Co. KG

Harkortstraße 5

57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-olpe.de
After-sales service
Service-Hotline
Tel.: +49 2761 891 800
Mail: anwendungstechnik@kemper-olpe.de
Liability
The manufacturer assumes no warranty or
liability in the event of:
- Failure to observe the instructions in this
manual,
- Incorrect installation and/or operation,
- Unauthorised modification of the product,
- Other improper methods of operation.
12 / 52 - K410068601001-00 / 01.2021 - © www.kemper-olpe.de
Safety instructions for installation and maintenance
Use
The KEMPER quarter turn stop valve PLUS
12 with spring-reset servo drive is designed
14 for use in drinking water installations with
14 the KHS-Hygiene system and is suitable for
14 maintenance, stop and protection valve.
15
15 Only use the KEMPER quarter turn stop valve
16 PLUS with spring-reset servo drive
18 - in sound condition
19 - as intended
20
21
International approvals
WRAS
SVGW
Norms
EN 50581
EN 60730-1
EN 60730-2-14
Directive Figure 686 01 I 686 05
RoHS-Directive 2011/65/EU
Directive 2004/108/EG (2014/30/EU)
for the electromagnetic compatibility
Directive 2006/95/EG (2014/35/EU)
Low voltage directive
for Figure
686 01
686 05
686 05