Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS.-
Take the unit out of the box and place
it on the flat floor.
Make sure that all of the pieces are
there:
(A)
Platform;
control; (C) Power cord; (E) Manual
REMOTE CONTROL.-
A remote control for comfortable
selection of modes is included.
FITTING THE BATTERIES.
This
remote
ALKALINE BATTERIES AAA. To fit
the batteries, take the cover off the
back of the remote control (B) and
carefully insert the two «AAA». Make
sure that the batterys' polarity is
correct (matching the battery «+»
terminal with the «+» sign inside the
battery compartment, and the «-»
terminal with the «-» sign).
Replace
the
cover.INSTRUCTIONS FOR USE.-
For
working
VIBROQUICK PRO you can choose
one of 3 present programs or manual
mode.
(B)
Remote
control
uses
battery
compartment
with
the
platform
START UP.-
Connect the power cord with the
platform and plug it into the electric
wall socket (220V).
Red light (POWER) will light up.
MANUAL FUNCTION.-
1. For start working with the platform
point the receiver of the remote control
to the platform and press the button
. The platform will be working
using 35Hz.
2. For increase the frequency to
40Hz/45Hz/50Hz press the button
40/45/50. Green/blue/red light will light
up.
3. For decrease the frequency press
the button directly.
PROGRAM FUNCTION.-
There are three programs: P1 Warm
up, P2 Stretching, P3 Intensive
training (see the program table at the
end of the manual).
1. Point the receiver of the remote
two
control to the platform and press the
button P1/P2/P3.
2. For start using the program press
the button
3. The platform will work according to
the chosen program and its rest time.
It will trun off automatically when the
program finishes. If you want to turn
off the program before it finishes press
the button
9
.
.
Publicité
