Maytag MLG27PN Instructions D'installation page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Code
Explanation
1. 00
MONEY COUNTER OPTION
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
1. 00
Not Selected "OFF."
1. 0C
Selected "ON."
• Press the DELICATES button 3 consecutive
times to select "ON" and 3 consecutive times
to deselect (Not Selected "OFF"). Counter resets
by going from "OFF" to "ON."
1. C0
Selected "ON" and not able to be deselected.
• To select "ON" and not able to be deselected,
first select "ON"; then within 2 seconds, press
the DELICATES button twice, the WHITES AND
COLORS button once, and exit set-up mode.
• Press the PERM. PRESS button once to advance
to next code.
2. 00
SPECIAL PRICING OPTIONS
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
2. 00
Not Selected "OFF."
2. SP
Selected "ON."
• Press the DELICATES button once to change
this selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes "3.XX" through "9.XX."
• Press the PERM. PRESS button once to advance
to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00
Currency amount
in HUNDREDS
4 00
Currency amount
in ONES
5 00
Currency amount
in HUNDREDTHS
24
ELECTRONIC CONTROL SETUP INSTRUCTIONS
3 01 = 100.00
4 68 = 68.00
5 75 = 00.75
TOTAL = 168.75
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED
Code
Explanation
3. 06
SPECIAL CYCLE PRICE
3. 06
Represents the number of coins (coin 1)
to start the dryer; may adjust from 0–39.
(See b.xx set up for VALUE OF COIN 1.)
• Advance from 0–39 by pressing the
WHITES AND COLORS button. Factory default
of 6 x coin 1.
PN MODELS ONLY: Factory default of 0 coins.
3. 00
• Press the PERM. PRESS button once to advance
to next code.
4. 05
SPECIAL DRY TIME
4. 05
PD MODELS: Represents the number of minutes
per coin (coin 1).
• Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
• By pressing the WHITES AND COLORS
button, the value can be adjusted from
1 to the maximum minutes.
4. 45
PN MODELS: Represents the cycle length for free
cycles. Example: "4 45" = 45 minutes.
• Press the PERM. PRESS button once to advance
to next code.
TIME-OF-DAY CLOCK, MINUTES
5. 00
5. 00
This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the WHITES AND
COLORS button.
• Press the PERM. PRESS button once to advance
to next code.
TIME-OF-DAY CLOCK, HOURS
6. 00
NOTE: Uses military time or 24 hr. clock.
6. 00
This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the WHITES AND
COLORS button.
• Press the PERM. PRESS button once to advance
to next code.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mlg27pd

Table des Matières