Drill Safety Warnings - Ryobi LDD1401 Manuel D'utilisation

GB
FR DE ES IT

DRILL SAFETY WARNINGS

Know your power tool. Read operator's manual
■
carefully. Learn its applications and limitations,
as well as the specific potential hazards related to
this power tool. Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Always wear safety glasses with side shields.
■
Everyday glasses have only impact resistant lenses.
They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
Protect your lungs. Wear a face or dust mask if
■
the operation is dusty. Following this rule will reduce
the risk of serious personal injury.
Protect your hearing. Wear hearing protection
■
during extended periods of operation. Following
this rule will reduce the risk of serious personal injury.
Battery tools do not have to be plugged into
■
an electrical outlet; therefore, they are always
in operating condition. Be aware of possible
hazards when not using your battery tool or
when changing accessories. Following this rule
will reduce the risk of electric shock, fire, or serious
personal injury.
Do not place battery tools or their batteries near
■
fire or heat. This will reduce the risk of explosion and
possibly injury.
Do not crush, drop or damage battery pack. Do
■
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
Batteries can explode in the presence of a source
■
of ignition, such as a pilot light. To reduce the risk
of serious personal injury, never use any cordless
product in the presence of open flame. An exploded
battery can propel debris and chemicals. If exposed,
flush with water immediately.
Do not charge battery tool in a damp or wet
■
location. Following this rule will reduce the risk of
electric shock.
For best results, your battery tool should be
■
charged in a location where the temperature is
more than 10°C but less than 37.78°C. To reduce
the risk of serious personal injury, do not store
outside or in vehicles.
Under extreme usage or temperature conditions,
■
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Following this rule will
reduce the risk of serious personal injury.
NL PT DK SE FI NO
English
RU PL CZ HU RO LV
Save these instructions. Refer to them frequently
■
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also to prevent misuse of the product and
possible injury.
DESCRIPTION
1. Keyless Chuck
2. Switch Trigger
3. Rotation Selector (Forward/reverse)
4. Double-Ended Bit
5. Battery Pack (not included)
6. Latches
7. Depress Latched To Release Battery Pack
8. Torque Adjusting Ring
9. To Decrease Torque
10. To Increase Torque
11. Reverse
12. Forward
13. Unlock (Release)
14. Lock (Tighen)
15. Chuck Jaws
16. Bit Storage
17. Drill Bit
SPECIFICATIONS
Voltage
Chuck
Switch
No load speed (drill mode):
Clutch
Max. Torque
Max. Spade Bit
Weight - not incl.battery pack
MODEL BATTERY PACK
(not included)
BPP-1413
BPP-1415
BPP-1417
LDD1401
BPL1414
1
LT EE HR SI SK GR
14.4 V
0.8 - 10 mm
Variable speed
0 - 750 min -
1
24 Positions
18 Nm
25 mm
0.98 Kg
CHARGER
(not included)
BCL1418
BC-1440
BCA-144
BC-1415-S
BCL14181H
BCL14183H
BCL1418
BCL14181H
BCL14183H
TR