Workplace; Important - Steba VG 30 Slim Mode D'emploi

Attention! Housing and glass get hot. Danger of burns!
∙
Do not place the appliance on a sensitive surface (e.g.
painted furniture) and keep a distance of at least 70cm
to burnable materials.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm². A cable drum must always be unwound.
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hygiene: Please always clean the device to avoid bacteria and
mold formation.
Cleaning
Attention! Pull the plug before cleaning and allow
∙
the device to cool down.
∙ Never immerse the unit into water.
∙ Pull the controller out of the grill plate.
∙ Clean the grill plate with a rinsing brush and detergent (if heav-
ily soiled, soak in soapy water beforehand.)
∙ Wipe the housing with a damp cloth and a little washing-up
liquid.
∙ Never immerse the controller housing with the supply line in
water!

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable and a heat resisting surface. It is
important that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
11