Drain System - Maytag MAT20CSAGW Instructions D'installation

DRAIN SYSTEM

Drain system can be installed using a floor drain, wall standpipe,
floor standpipe, or laundry tub. Select method you need.
Floor standpipe drain system
203 mm
(8")
Minimum diameter for a standpipe drain: 51 mm (2"). Minimum
carry-away capacity: 38 L (10 gal.) per minute. Top of standpipe
must be at least 990 mm (39") high; install no higher than
2.44 m (96") from bottom of washer.
Wall standpipe drain system
203 mm
(8")
See requirements for floor standpipe drain system.
12
990 mm
(39")
Floor drain system
Floor drain system requires a Siphon Break Kit (Part Number
285320). Minimum siphon break: 710 mm (28") from bottom
of washer. Additional hoses may be needed.
Laundry tub drain system
203 mm
(8")
Minimum capacity: 76 L (20 gal.). The top of the laundry tub
must be at least 990 mm (39") above floor.
710 mm
(28")
990 mm
(39")