Qualification Of Personnel - Condair RO Série Guide Rapide

The Condair service team can help. Condair has expert technicians who can provide:
• Bacteriological troubleshooting on site
• Cleaning and disinfecting
• Preventive maintenance
• Repair and fault finding
• Training and guidance
2.3 Ensure safe operation
If it is suspected that safe operation has been compromised, the RO-H should immediately be shut down
and secured against accidental power-up.
Shut down the RO-H if:
• Components are damaged, worn or very soiled.
• The RO-H does not work correctly.
• Joints, pipes or hoses are leaking.
No modifications must be made on the RO-H without the manufacturer's consent. All persons working
with the RO-H must report any alterations made to the RO-H to the owner immediately. Use only original
accessories and spare parts available from your Condair representative.
2.4

Qualification of personnel

All installation work must be performed only by persons who are familiar with the Condair RO-H Sys-
tem and sufficiently qualified for such work. All work on electric installations must only be performed by
adequately qualified electricians.
Further details of qualification of personnel, safety considerantions and warranty can be found in the
complete Installation, Operation and Service Manual.
2.5 Important note regarding warranty
RO-H parts are covered by a two-year warranty from the invoice date with the exception of the replace-
ment parts listed in the routine maintenance section. Failure to observe the manufacturer's installation
and maintenance recommendations and instructions will invalidate the warranty. Condair Ltd. cannot
be made liable for damage or injury attributable to failure to observe the manufacturer's installation and
maintenance recommendations and instructions.
5
For your safety