Function Display; Display Instructions - Condair RO Série Guide Rapide

5.1.1 Controller menu
The computer box controls the working status, to ensure the machine work normally, and the RO membrane
is in good working condition.
Qulity flush
countdown
+ TDS display
Letter state
8 (dynamic rotation)
means water pro-
duction
F means flushing
8 (static display)
means the water
tank is full and
there is no water
demand
0 means lack of
water
6 means mainte-
nance
Manual quality flush

Display instructions

When the high-pressure switch detects that the water pressure in the tank is
lower than the set value, the water purifier enters the water production pro-
cess.
Flushing of RO either at startup or when the "strong washing" button has
been pressed. If there has not been any pure water production within 12 h,
the function is triggered automatically.
When the high-pressure switch detects that the water pressure in the tank
reaches the set value, the RO will stop production.
When the low-pressure switch detects that the inlet water pressure is lower
than 8 psi, the water purifier will stop working and the buzzer sounds.
The buzzer sounds. A service (filter, RO membrane change) is necessary.
Please contact Condair Service.

Function display:

- F: Flushing
- Running 8: Water production
- Lit 8: Tank full, not water need
- Lit 0: No water, too low incoming
pressure
- Lit 6: Service needed
11
Maintenance