Introduction - Crivit 26235 Mode D'emploi

GB IE
FLOOR PUMP
Instruction Manual

Introduction ..............................................................5

Intended use .............................................................5
Package contents .....................................................5
Technical data ..........................................................5
Attention safety instructions .....................................5
Initial use of the pump .............................................5
Adapter.....................................................................6
Cleaning & care instructions ...................................6
Disposal ....................................................................6
Warranty ..................................................................6
Warranty terms ........................................................6
Distributor .................................................................6
Service address .......................................................6
Introduction:
Congratulations!
With your purchase you have chosen a high-quality
product. Make yourself familiar with the product before
starting to use it. Carefully read the following instruction
manual. Use the product only as described and only
for the specified areas of application. Keep this instruc-
tion manual for future reference. When transferring this
product to third parties, also include all documents.
Symbols in this instruction &
installation manual:
!
This symbol indicates a risk of injury.
!
This is how additional information is ear-
marked.
!
Intended use:
This floor pump is suitable for inflating all conventional
bicycle tyres. Other uses or modifications to the prod-
uct are considered non-intended usage and can lead
to risk of injury and damages. The distributor bears
no liability for damages resulting from non-intended
usage. The product is not intended for commercial use.
Package contents:
1 x floor pump
1 x metal adapter for balls,
2 x plastic adapters for air mattresses, inflatable toys, etc.
1 x instruction manual
(A1 / A2)
Technical data:
Type: Floor Pump
IAN 272433
ITEM NO: 26235
Monz-Nr. PO30000124
Nominal pressure: 7 bar / 100 PSI
Maximum allowable pressure: 8 bar / 116 PSI
Displacement: 370 ml / 370 cm³
Pressure hose length: 90 cm
Production date: 2016
Warranty: 3 years
!
Attention safety instructions!
You can inflate all bicycle tires up to the floor
pump's indicated maximum allowable pressure
(max. 8 bar / 116 PSI) or to the tyre manufacturer's
indicated maximum tyre pressure. This can usually
be found on the tyre wall. The indicated maximum
values may not be exceeded at any time.
Warning – Risk of injury through explosion if maxi-
mum permitted pressure values are exceeded.
Defective or damaged air pumps may no longer be
used due to risk of injury. Defective Floor pumps must
be properly disposed of. Repairs are not possible.
Caution – damaged floor pump, hose, adapter
or faulty connectors cause risk of explosion.
Due to the high operating force and the risks as-
sociated with this, the product is not suited for use
by children or persons with physical and/or mental
disabilities. Please note that the pump plunger and
pump cylinder become very hot over longer periods
of pumping due to the friction between them. For this
reason, you should only grasp the floor pump on the
pump handle after pumping in order to avoid burns.
Due to the risk of injury, a defective or damaged
floor pump may never be used.
Warning! Some bicycle valves do not allow
pressure display.
For your own safety, please check the air pressure
with a calibrated manometer (i.e. at a fuel station).
Initial use of the floor pump:
(B1 / B4)
(B1) Place the floor pump on a level and stable surface.
(B2) There must be no kinks in the pump hose.
(B3) During pumping, please always position
yourself with both feet on the foot plate of the
floor pump to ensure it won't fall over.
(B4) Operate the pump handle in a smooth and
even manner and not too quickly.
5