Muller licht tint 404010 Mode D'emploi page 40

Please note:
• You define yourself what a group actually is. You could group together the
bulbs in a room or on a floor, for example.
• A group can be expanded or made smaller and bulbs can be moved from one
group to another.
• An individual bulb could also be a group all on its own.
• You can use the tint remote control to control a maximum of 4 groups,
whereby the fourth group is a combination of the other three groups.
• Think beforehand about which bulbs you want to group together and try to
make the groups logical and comprehensible. This means you will be able to
use the groups later using the group button quickly and without having to
waste time testing them.
Using the group button
• The first time the group button is pressed, the LEDs above it will show which
group you are in.
• Pressing it again will advance you one group.
• You are in the next group when the following LED above the group button
lights up:
° LED 1 for the first group
° LED 2 for the second group
° LED 3 for the third group
° LED 1, 2 and 3 for all groups
tint-REMOTE CONTROL
INSTRUCTION MANUAL
40