Basic Functions; Switching On/Off; Set Brightness - Muller licht tint 404010 Mode D'emploi

Basic functions

Switching on/off

Press the standby button to switch the bulbs on and off again. The memory
function will store the last "illumination state" and will start again auto-
matically the next time the bulb is switched on.
Set colours
Press to select the desired colour:
Short press: The colour will switch in the desired direction on
the colour scale.
Long press: The colour will jump to a permanently stored
colour value.
Set white tone
Long-press to set the desired white tone from a continuous scale that reaches
the super-warm white range.

Set brightness

Long-press to set the desired brightness on a continuous scale.
Short-press to select permanently stored white tone set-
tings: warm white, neutral white and cold white.
Short-press to select permanently stored brightness levels:
100%, 80%, 50%, 20%, 10% and 5%.
tint-REMOTE CONTROL
INSTRUCTION MANUAL
38