Setting The Operating Mode/Calling Up The Settings Menu - Miele PAC 1045 Mode D'emploi

Setting the oper-
ating mode/call-
ing up the Set-
tings menu
You can change the set operating mode in any operating status by
holding down the  and  buttons at the same time for at least
3 seconds. You will then be prompted to enter the following access
code:
User code
3377
In order to change a digit in the access code, the cursor must be
placed under the relevant digit. The cursor position is changed by
pressing and holding the  or  arrow button.
To increase the value of the digit (+1), briefly press the  button.

To decrease the value of the digit (-1), briefly press the  button.

To move the cursor one position to the right, press the  button for

3 seconds.
To move the cursor one position to the left, press the  button for

3 seconds.
When all of the code digits are set correctly, confirm the entry by

pressing and holding the  and  buttons at the same time for at
least 3 seconds.
You are now in the
Select the required operating mode by holding down the  and

 buttons at the same time for at least 3 seconds.
Depending on which operating mode you select, further selectable

options (e.g. Flow, clock control, Room size) may be displayed. You
can select these options or skip past them by pressing the  and
 buttons briefly at the same time.
The appliance switches back to the previous operating status with the
newly selected operating mode. If no actions are carried out in the
Settings
menu within 60 seconds, the menu is exited automatically.
en - Using the machine
Settings
menu.
47