Settings Menu For "Co2+Time Mode - Miele PAC 1045 Mode D'emploi

Settings menu for
"CO2+time mode"
If initial flow is switched on, the air purifier will start the running be-
fore the actual switch-on time: if, for example, the switch-on time is
set for 6:00 am with 5 minutes of initial flow time, the air purifier will
start at 5:55 am.
After the switch-off time, Miele ThermoControl is started with a run-
ning time of 20 minutes. This is followed by a 10-minute fan run-on
phase.
Settings CO2+time mode
CO2 mode Room size
CO2+time mode Individual day setting
Language Mon–Fri/Sat+Sun
CO2+time mode
Room size
Individual day setting
Mon–Fri/Sat+Sun
CO2+time mode
Individual day setting
Mon–Fri/Sat+Sun
Flow
Modus CO2+Uhr
Mon–Fri/Sat+Sun
Flow
Intensive circulation
CO2+time mode
Flow
Intensive circulation
Back
Sensitivity
The sub-menu is used to set the sensitivity with which the
controls respond to open windows when activating intensive circula-
tion.
High
When is selected, intensive circulation is activated more
quickly. When Low is selected, it takes longer for intensive circula-
tion to be activated when a window is open.
If settings are configured, these settings will automatically be adop-
ted for the other operating modes.
en - Using the machine
Room size
80 m²
Please set
Individual day setting
On Monday 07:00
17:00
Off Monday
On Tuesday 07:00
Please set
Mon–Fri/Sat+Sun
On Mon–Fri
Off Mon–Fri
On Sat–Sun
Please set
Flow Flow speed
Off
On
Back
Select option Please set
Flow Flow time
Off
On
Back
Please set
Select option
Intensive circ. speed
100 %
Please set
Intensive circ. time
05 min
Please set
Sensitivity
High
Medium
Low
Select option
100 %
05 min
51