Wall Bracket (Optional) - Miele PAC 1045 Mode D'emploi

Screw the adjustable feet out far enough that the air purifier stands

entirely on the feet when in its upright position (castors not in con-
tact with the floor).
Adjust the adjustable feet until the air purifier is level. Use a spirit

level to ensure correct alignment.
After the appliance has been aligned, screw the nuts on the ad-

justable feet tightly to the base plate using an open spanner
(17 mm). Check the stability of the appliance once it has been in-
stalled.
 Risk of tipping if the air purifier is moved with the adjustable
feet attached.
When the adjustable feet are attached, the castors on the air puri-
fier can no longer be used to move it around. The air purifier must
not be moved with the adjustable feet attached due to the risk of
tipping.
Remove the adjustable feet before moving the air purifier to a dif-
ferent location.

Wall bracket (optional)

To provide extra protection against the air purifier tipping over, you
can secure it to a wall using the bracket provided if necessary.
Mounting the wall bracket (optional)
en - Installation
55