Weelko P03 Mode D'emploi page 8

1. Plug the power cable into a wall
socket and plug the adapter into the
spatula.
2. Press the On/Off button to turn
the device on. When you turn on the ins-
trument, the continuous wave and the
lowest power are selected by default.
3. Choose the most appropriate
wave for each treatment. There are three
types of waves: pulsed wave, continuous
wave and combined wave (it combines
the pulsed and continuous waves). If the
continuous wave is chosen, the indica-
tor will not change. If the pulsed wave
is chosen, the indicator will flash. If the
combined wave is chosen, the indictor
will light during one second and then it
will flash. The type of wave can be chan-
ged depending on the treatment. The
indicator and its color change depending
on the selected power, so the indicator
shows the power and the flashing shows
the type of wave.
4. Adjust the intensity accordingly.
There are three power levels: low, middle
and high. Low power is established by
default.
5. The treatment time by default is
15 minutes. The device will beep af-
ter the selected time is over and it will
switch off automatically after this period
of time.
EN
Operating instructions
1. Turn the device on. The indicator will
light up and the spatula will start wor-
king. The continuous wave and the lowest
power are selected by default.
2. Adjust the type of wave and the power
according to the type of treatment to be
made. The combined wave is ideal for
sensitive skins.
3. Clean the area to be treated with a
lotion.
4. Place the spatula on the skin with an
inclination of 45 degrees, as shown in the
pictures below. Move the spatula forward
deeply to clean the area to be treated.
Choose the power according to the cha-
racteristics of the treatment. (Note: Clean
the skin and the spatula with clean wa-
ter. Keep the skin moistened during the
treatment.
**Please use the spatula as shown in pictures
A, B and C.
© 2020 Weelko
www.weelko.com
Importer: Weelko Barcelona, S.L.
ESB65397556