Troubleshooting And Solutions - CONTINENTAL EDISON CECC100AP Guide D'utilisation

TROUBLESHOOTING AND SOLUTIONS

WARNING!
Before attempting to repair the unit, ensure that you unplug it from the
mains.
Only a qualified electrician or other similarly qualified person can carry
out repairs not listed in this guide.
Issue
The freezer will not
turn on
The freezer is too
cold
Food is not
sufficiently frozen
IMPORTANT! Some noise emissions are normal, such as the sound of
the compressor or the refrigerant circulating in the unit.
problem(s) persist, please contact the after-sales service team.
Possible causes
 The power cord is not
plugged in correctly.
 A fuse has blown or is
faulty.
 The electrical outlet is
defective.
 The thermostat is set to
too cold a temperature or
is turned to Max.
 The thermostat is not
set to a suitable position.
 The freezer door has
been left open for a long
period of time.
 A large quantity of hot
items has been placed in
the freezer during the last
24 hours.
 The unit is installed near
a heat source.
 Plug the power cord in correctly.
 Check the fuse and replace it if
necessary.
 Have a qualified electrician
repair any problems related to
electrical circuits.
 Temporarily select a setting that
is not as cold.
 Review the chapter on setting
the thermostat.
 Avoid leaving the door open for
longer than necessary.
 Temporarily select a colder
setting for the thermostat. In
addition, hot food must not be
placed in the freezer: food must
be at room temperature before
being placed in the freezer.
 Follow
instructions
location.
 Move the unit slightly.
46
Solutions
the installation
regarding
If the
the