Technical Data - SOMFY J4 1TN Notice D'installation

2.4. Technical data

2.4.1. Cutaway diagram of the head rail
For detailed technical information, please refer to the appropriate data sheets and interface
drawings.
R 13 max
1TN
2TN
HTM
36 mini
2.4.2. Applicable torque
J406
Maximum applicable
6
torque/motor type
N.m
2.4.3. Limit switch capacity
Maximum
1TN 2TN HTM
capacity
of the limit
60 60 90
switch unit
(in turns)
WT
20 mini
J410 J418
For the J418 motor, the maxi-
mum torque on one shaft output
10 18
is 12N.m
N.m N.m
WT 1TN 2TN
Factory-set
capacity
of the limit
200 60 60
switch unit
2.4.4. Thermal time
J4 1TN/2TN/HTM/WT motors are protected by a thermal cut-out in the event of a temperature rise
caused by continuous use, longer than 6 minutes.
2.4.5. Motor angle
The J4 motor is designed to operate in a horizontal position:
NOT OK
2.4.6. Direction of rotation
HTM WT
60 120 Power supply
Operating temperature
Index protection rating
Safety level
Torque (Nm)
Power (W)
EN
OK OK
Power supply
connector
Bottom
230 V ~ 50 Hz
- 20 °C à + 70 °C
IP 54
Classe I
6 10
95 110
10°
max
Top
18
155