Optional Accessories - Makita BO6040 Manuel D'instruction

Applying wax
1
003340
Use an optional sponge pad. Apply wax to the sponge
pad or work surface. Run the tool to smooth out wax.
NOTE:
First, wax a non critical portion of the work surface
•
to make sure that the tool will not scratch the
surface or result in uneven waxing.
Removing wax
1
003342
Use an optional felt pad. Run the tool to remove wax.
Polishing
1
003344
Use an optional wool pad. Run the tool and apply the
wool pad gently to the work surface.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
1. Sponge pad
1. Felt pad
1. Wool pad
7
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Hook-and-loop
•
pre-punched holes)
Sanding cloth 150
•
Pad 150 (Super soft, Soft, Hard)
•
Hook-and-loop type sponge pad
•
Hook-and-loop type wool pad
•
Hook-and-loop type felt pad
•
Side grip
•
Joint
•
Hex wrench
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
or attachments
Only use accessory or
type abrasive discs
are
(with