Messages D'information Sur Les Évènements Survenus - Siemens SCALANCE X-300 Manuel De Configuration

Annexe D
D.1 Messages d'erreur du SCALANCE X300 / X400
Messages d'information sur les évènements survenus
Les messages ci-après servent à informer sur les évènements qui ne sont pas directement
liés à l'état d'erreur (LED Fault) :
● User entry: <entrée utilisateur>
● Unknown command <commande> for <nom du protocole> protocol received.
● Device is configured to ring <off | ARD | client HRP | client MRP | gestionnaire HRP |
gestionnaire MRP>.
● Standby function <Master | Slave>.
● Observer started.
● Observer stopped.
● Observer contacted Redundancy Manager <adresse MAC>.
● Standby is waiting for <partner | observer>.
● Standby <partner | observer> connected to <master | slave> <adresse MAC> <numéro
de port>.
● Standby <partner | observer> lost connection to <master | slave> <adresse MAC>
<numéro de port>.
● Port <numéro de port> is isolated ring port.
● Port <numéro de port> is static ring port.
● No SMTP connection to mail server.
Server IP address <adresse IP> TCP port <numéro de port TCP>.
● No SMTP application found.
Server IP address <adresse IP> TCP port <numéro de port TCP>.
● SMTP (E-Mail) connection aborted. Server IP address <adresse IP>.
● Unable to send message to syslog server. Please check syslog socket configuration.
● Connected to syslog server.
● SNMP: Authentification failure.
● R)STP: new root bridge detected.
● (R)STP: topology change detected.
● Unable to send E-Mail(s). Please check IP configuration.
● Unable to send trap(s). Please check IP configuration.
● Failure reply code <code d'erreur> from SMTP server.
● Restart requested.
● No C-PLUG found. Internal flash memory used.
● An empty C-PLUG was found.
● C-PLUG format request.
● A filled C-PLUG was found.
● A corrupted C-PLUG was found.
392
Manuel de configuration, 06/2015, C79000-G8977-C187-25
SCALANCE X-300 / X-400