Cleaning And Maintenance - Domo DO324A Mode D'emploi

Please note: this time is always from the hour when you programme the setting. For example: it is now 1
pm. You want the apparatus to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h and TIMER OFF on 5.0
h.
SLEEP BUTTON
SLEEP
This setting can be used during the night. It will keep a comfortable sleeping temperature and will save
energy. This function can be selected with the "cool" and "auto" setting. The
display Cancel this setting by pressing the "on/off", fan, sleep or mode button.
When pressing the "sleep" button, the selected temperature will be elevated with 1 °C after 30 min. After
another 30 min the temperature will increase with another 1°C. The airco will maintain this temperature
for 7 hours. After this time, the airco will go back to the original set temperature and the "sleep" function
will end.
NOTE : this function can not be selected with the "fan" or "dry" function.
SWING BUTTON
SWING
To adjust the air flow.
FOLLOW
FOLLOW ME BUTTON
ME
With this, the ambient temperature is measured by the remote control instead of by the unit. Place
the remote control where you want the set temperature to reach. This function ensures the optimum
temperature when using the 'auto' and 'cool' settings. Press the 'follow me' button to activate the
function. The remote control will send a signal to the air conditioner every 3 minutes. The symbol
appears on the display. Press the button again to cancel the function.
LED LED BUTTON
Press this button to turn off all the indicator lights on the display, e.g. when using the device at night.
Press the button again to turn the display back on.

CLEANING AND MAINTENANCE

DRAINING
Permanent drain
During the "dry" mode you can use a permanent drainage.
1. Remove the drain plug and the rubber top.
2. Attach the drain hose on the drain.
3. Make sure the water is drained in a save and permanent way.
Drain code P1
When you don't use the permanent drain, the non recycled condesation
water, will be stored in the water tank.
· When the water tank is full a few beep signals will be heard and on
the display the code P1 will appear. The "cool" or "dry" mode will
end automatically. The fan will continue to operate, this is normal.
· Move the unit over to a place where you can easily drain the
water.
· Remove the drain plug at the bottom of your unit and drain the
water.
www.domo-elektro.be
ON/OFF SHORT
CUT
MODE TIMER
ON
TEMP
TIMER
FAN
OFF
FOLLOW
SLEEP SWING LED
ME
ON/OFF
MODE
FAN
SLEEP SWING
SHORT
CUT
TIMER
ON
TEMP
TIMER
OFF
FOLLOW
LED
ME
symbol appears on the
DO324A
57