Domo DO324A Mode D'emploi page 53

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. FAN touch
With this touch you can select the fan speed. The related indication light will turn on.
There are four settings:
·
low
·
medium
·
high
·
auto The indicator light will not illuminate in auto mode.
4."+" and "-" touch
Use these touches to select the temperature or to adjust the timer. When pressing both arrows at the
same time you can switch between "C°" or "F°".
5. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the function will
change : AUTO – COOL – DRY – FAN. The related indication light will turn on on the control panel.
AUTO function
When the airco is in the "auto" mode, the airco will automatically make a selection between "cool" or
"fan" function, depending on the room temperature and the selected temperature.
The airco will automatically stabelise the room temperature on the selected temperature.
When using the "auto" function, you can't select the fan speed.
COOL function
The unit will cool with this setting.
Press the "mode" touch until the "cool" indication light turns on.
Use the arrow touches to select the desired room temperature.
Use the "fan" touch to select the desired air speed.
DRY function
This function is used to dehumidify the air.
Press the "mode" touch unit the "dry" indication light turns on.
With the selection you can't select te temperature or fan speed.
Keep windows and doors closed for an optimal dehumidification.
It is not necessary to install the air outlet hose with this function.
FAN function
This function allows you to use the unit as a fan.
Press the "mode" touch until the fan indication light will turn on.
Press the "fan" touch to select the air speed.
The temperature can't be selected.
You don't need to attache the air outlet hose.
6. TIMER touch
With this function you can select when the unit must turn on or off.
When the unit is on, you press the "timer" touch. The "timer off" indication light will turn on. This
indicates that the "auto shut off" is activated. When pressing het "timer" touch again, the "timer on"
indication light will turn on. This indicates that the "auto on" function is activated.
www.domo-elektro.be
53
DO324A

Publicité

Table des Matières
loading

Table des Matières