Atag WS60211IM Mode D'emploi page 30

USE
EN 6
Note!
The timer function cannot be activated when the intensive setting
is switched on.
Clean Air function:
The Clean Air function allows you to freshen the air in your kitchen for
a maximum of 24 hours.
1. Switch off the cooker hood by pressing the on/off button.
2. Press and hold the Clean Air button for approximately 3 seconds.
The cooker hood switches on automatically for 10 minutes every
hour at the lowest speed setting.
During this period, the on/off button will be lit continuously while the
speed setting 1 button and the Clean Air button will flash.
3. Switch off the Clean Air function in the meantime by pressing and
holding the Clean Air button for approximately 3 seconds, or by
switching off the cooker hood by pressing the on/off button.
Note!
The Clean Air function cannot be activated when the intensive setting
or the timer function is switched on.
Button lock function
The button lock function allows you to lock the buttons for cleaning
purposes or for child safety.
1. Switch off the cooker hood by pressing the on/off button.
2. Press and hold the on/off button for approximately 5 seconds until
all buttons will flash from left to right.
All buttons are locked.
3. To unlock the buttons, press and hold the on/off button again for
approximately 5 seconds.