patura P20 Mode D'emploi page 34

Operating PATURA P60 energisers
PATURA P60 has an optional security locking feature that requires a security code to be ente-
red to switch on the energiser.
Switching on and off when the energiser is not security locked
To switch on, press
To switch off, press
Switching on and off when the energiser is security locked
Press and hold until the display turns on and shows two question marks
Press repeatedly until your security code appears on the display.
Press briefly to unlock and turn on the energiser.
Note: To step through numbers more quickly, press and hold down
If an incorrect security code is entered five times
locked and will no longer operate. The energiser must be taken to your dealer for unlocking.
Changing the power level
Press to change between half power and full power.
The pointer changes to indicate half power
Changing the pulse speed
To change the pulse speed, press
side of the display indicate the required setting.
Possible settings
Daylight
Darkness
Note: In night mode, the energiser senses darkness using the light sensor and automatically
changes the pulse speed. Ensure the light sensor remains clean at all times, by wiping away
any excessive dirt and water deposits off the top label.
Locking the energiser with a security code
Press and hold until the display turns on.
Press and together until the display shows zero and the padlock pointer flashes.
and hold until the display turns on.
and hold until the display turns off.
repeatedly until the two pointers
Fast Slow
1.5 s 2.5 s
1.5 s 2.5 s
, will show up, the energiser will be
or full power
+
Night Mode
Fast
2.5 s
1.5 s
- 34 -
.
.
.
on the right-hand
+
Night Mode
Slow
1.5 s
2.5 s