Technical Data; Bluetooth - Hilti DD 150-U Mode D'emploi Original

4

Technical data

4.1 Diamond core drilling machine
For rated voltage, rated current, frequency and/or input power, refer to the country-specific rating plate.
If the product is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the product. The operating voltage of
the transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Weight in accordance with EPTA Procedure-01
Weight of the drill stand with combination base plate and carriage
Permissible water supply pressure
Ideal distance of the mark on the anchor base plate from the hole center
Ideal distance of the mark on the vacuum base plate from the hole center
Ideal distance of the mark on the combination base plate from the hole
center
4.2

Bluetooth

Frequency range
Maximum output power
4.3 Working with vacuum base plate
Minimum vacuum
Max. core drilling tool diameter
4.4 Core bit diameter
Ø core bits (stand-
guided drilling, wet)
Ø core bits
(hand-guided)
Ø core bits
(hand-guided dry core
bits with PCD)
5 Using extension cords
WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
14 English
1st gear
4.0 in ... 6.4 in
(102 mm ... 162 mm)
4.8 in ... 6.4 in
(121 mm ... 162 mm)
2.0 in ... 6.4 in
(52 mm ... 162 mm)
2nd gear
1.1 in ... 3.4 in
(28 mm ... 87 mm)
1.6 in ... 4.4 in
(41 mm ... 112 mm)
•/•
2204401
*2204401*
DD 150-U
8.4 kg
29.3 lb
(13.3 kg)
≤ 6 bar
10.5 in
(267 mm)
11.5 in
(292 mm)
11.5 in
(292 mm)
2,400 MHz ...
2,483 MHz
10 dBm
9.4 psi
(0.65 bar)
6.4 in
(162 mm)
3rd gear
0.5 in ... 1.0 in
(12 mm ... 25 mm)
0.3 in ... 1.5 in
(8 mm ... 37 mm)
•/•