Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.4 Overload and overheating protection
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status
display.
4
Technical data
4.1 Technical data
Rated voltage
Weight
Speed
Torque (soft joint)
Torque range (15 settings)
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
4.2 Battery
Battery operating voltage
Ambient temperature
Storage temperature
Charging temperature
*2125997*
Printed: 19.06.2019 | Doc-Nr: PUB / 5245424 / 000 / 04
1st gear
2nd gear
2125997
10.8 V
2.6 lb
(1.2 kg)
0 /min ... 400 /min
0 /min ... 1,500 /min
≤ 9 ftlb
f
(≤ 12 Nm)
0.4 ftlb
... 2.6 ftlb
f
f
(0.5 Nm ... 3.5 Nm)
0.03 in ... 0.4 in
(0.8 mm ... 10 mm)
3/64 in ... 35/64 in
3/64 in ... 25/64 in
3/64 in ... 15/64 in
10.8 V
1 ℉ ... 140 ℉
(−17 ℃ ...
60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ...
40 ℃)
14 ℉ ... 140 ℉
(−10 ℃ ...
60 ℃)
English
9
Publicité
Table des Matières
