Operation - RedMax RA-EX850 Manuel D'utilisation

The working technique
WARNING: Branches or grass can get
caught between the cutting attachment
guard and the cutting attachment. Always
stop the engine before you clean the cutting
attachment.
• Use full throttle when you cut and decrease to idle
speed after each cut.
CAUTION: Engine damage can occur if
the engine runs for too long at full throttle
without load.
Recommended use for the cutting
attachment
The cutting attachment blades moves with a small angle
and can cut in all directions. Move the cutting
attachment along the ground at a height where the
support cup touches the ground. Use the cutting
attachment to cut:
• Park areas and road edges.
1139 - 001 - 03.04.2019
• Always wear heavy-duty gloves when you repair the
cutting attachment. The cutting equipment is very
sharp and can easily cause cuts.
• Use only original spare parts for repairs.

Operation

• Road side and near fences.
• Around stones and trees.
• Near water.
CAUTION: Do not put the gear housing
in water.
7