Safety; Safety Definitions - RedMax RA-EX850 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Top grease plug
4. Socket to move the blades manually
5. Bottom grease plug
6. Cutting attachment guard
7. Shaft
8. Support cup
9. Transport guard
10. Combination wrench
11. Information and warning decal
12. Operator's manual
Symbols on the attachment and on the
power unit
Careless or incorrect use of this attachment
can result in serious or fatal injury to the
operator or others.
Read the operator's manual carefully and
make sure you understand the instructions
before you use the attachment.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Always wear approved protective gloves.
California Proposition 65

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the operator's manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
1139 - 001 - 03.04.2019
WARNING
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects
or other reproductive harm.
Wear sturdy, non-slip boots.
Maximum cuts per minute.
The arrows show the limits for the position of
the handle.
The product can cause objects to eject,
which can cause injury.
Keep a minimum of 15 m / 50 ft distance to
persons and animals during operation of the
product.
yyyywwxxxx
Note: Other symbols/decals on the attachment refer to
special certification requirements for certain markets.

Safety

CAUTION: Used if there is a risk of damage
to the product and/or the attachment, other
materials or the adjacent area if the
instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
The serial label shows serial number.
yyyy is the production year and ww is
the production week.
3

Publicité

Table des Matières
loading

Table des Matières