P&C SOPS76PS Mode D'emploi page 31

Measurements
Please note that all dimensions provided are in millimeters (mm.) The sizes allow for only a small
degree of error so all cut-outs must be precise and square. To ensure the cabinet is well finished,
the cut edges must also be square and the cut edges are free of chips.
SOPS76PS - Single Oven Measurements
(under counter installation)
Void Cutout
When built under counter, there must be a void in the
rear of the cabinet. Leave 4" all around the void.
Additional support may be added to the shelf with the
void to help support the weight of the oven.
31