Jura Contact Details / Legal Information - Jura GIGA Xc Mode D'emploi

1 Tool required
U
Drill
U
10 mm drill bit
U
File
2 Installation
T Switch off coffee machine.
T Unplug from the power socket.
T Remove the water tank.
T Open the service cover on the back of the
machine by pressing above the JURA logo.
T Push the red sliding catches completely to
the rear to close the bean containers.
T Turn the blue locking devices outwards.
T Remove both bean containers.
T Remove drip tray and coffee grounds
container.
T Carefully lay the coffee machine on its back.
T Slide drain hose into guide until it clicks.
T Drill hole for valve in drip tray (10 mm drill
bit).
T Deburr drilled hole with a file.
T Insert valve (valve body and pressure spring
from outside, red O-ring from inside).
T Set coffee machine upright again.
T Fit drip tray.
T Fit water tank.
T Fit both bean containers.
T Turn the blue locking devices inwards.
T Pull the red sliding catches completely to the
front to open the bean containers again.
T Refit the service cover and fix it by pressing
above the JURA logo. It will click into place
audibly.
T Fill the bean containers with coffee beans
and fit the aroma preservation covers.
T Plug the machine into the power socket.
T Switch on coffee machine.
3 JURA contact details / legal
information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@
You will find additional contact details for
your country at www.jura.com.
Copyright
The instructions for use contain information which
is protected by copyright. It is not permitted to
photocopy these instructions for use or translate
them into another language without the prior
written consent of JURA Elektroapparate AG.
de
GIGA drip drain set
en
fr
it
nl
es
pt
sv
ru
5