Dust Collection - Jet DC-1200-M Mode D'emploi

Hose Assembly:
Attach the hose (A, Fig 9) with 2 provided hose clamps (P).
Attach the inlet (G) with screw M5.
Install the filter bag:
Attach the loop of the filter bag to the filter bag hanger (E, Fig
10).
Place the filter bag (H) over the housing (C).
Install the filter bag with retainer strap (N).
Fig 8
Fig 9
Note: make sure the bag is fastened securely so that no dust
will escape during operation.
Install the collection bag:
Place a collection bag (Q, Fig 11) over the housing (C).
Install the collection bag with retainer strap (N).
Note: make sure the bag is fastened securely so that no dust
will escape during operation.
5.3 Dust connection
Before operation, the unit must be connected to hoses and
ductwork.
Only electrically conductive and fire resistant flexible hoses
may be used.
Attach the hose:
Use a hose clamp (P, Fig 12) to connect the hose (O) to the
intake port.
Fig 10
Fig 11