Noise Emission; Contents Of Delivery; Unit Description; Assembly And Start Up - Jet DC-1200-M Mode D'emploi

Mains
Output power
Reference current
Extension cord (H07RN‐F)
Installation fuse protection
Protection class
Overall (LxWxH)
Net weight
4.2 Noise emission
Measured, in 1m distance, 1.6m above the floor, with flexible
hose connected. (inspection tolerance 4 dB).
Acoustic pressure level
(EN ISO 11202):
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.
4.3 Content of delivery
Filter bag
Collection bag
Mobile casters (4x)
Dust inlet 2 x 100 mm
Hose clamps 100mm (2x)
Hose ground wire
Operating manual
Spare parts list
4.4 Unit description
3~400V, PE, 50Hz
1,5kW (2HP) S1
2.8 A
4x1,5 mm²
16 A
I
1000x750x2000 mm
40 kg
LpA 80 dB(A).
Fig 1
A....Hose
B....Collector Body & Fan/Motor Assembly
C....Housing
D....Base
E....Filter Bag Hanger
F....Support Rods (3x)
G....Inlet
H....Filter Bag
I.....Gasket
J....Mobile Casters (4x)
K....Hex. Bolts (M8x16, 18pc; M8x25, 4pc; M6x20, 6pc)
Hex. Nuts (M8, 4pc; M6, 6pc)
Head Screws (M6x10, 16pc)
Washer (M8, 26pc; M6, 28pc)
Hex. Wrench (5mm, 1pc)
L....Motor Base
M...Handle
N....Retainer Strap (2x)
O....Hose
P.....Hose Clamp (2x)
Q....Collector Bag
R.....Switch
S......Motor
T......CEE Plug (400V) or Wire Plug (230V)
W....Outlet connector
5. Assembly and start up
5.1 Installation
The machine is designed to operate in dry, enclosed rooms
and must be placed stable on firm and levelled ground.
The room temperature must be between +5°C and +40°C.
Fig 2