Warranty Conditions; Construction And Function Of The Top Control On/Off - Burkert TopControl ON/OFF 8631 Instructions De Service

In the event of discrepancies, please contact our service department
immediately:
or your local Bürkert branch.
1.2

Warranty conditions

This document contains no warranty promises. We refer in this connection to
our General Conditions of Sale and Business. The condition for the warranty is
use of the unit for the intended purpose under the specified application
conditions.
ATTENTION!
2 CONSTRUCTION AND FUNCTION OF THE
TOP CONTROL ON/OFF
The Top Control ON/OFF is designed for the operation of pneumatically actuated
process valves. It can be combined with various types of valve from the Bürkert
system technology programme (see data sheets for types 2000, 2030, 2031,
2031K, 2652 and 2655). Top Control ON/OFF and pneumatic drive are
mechanically linked and form a functional unit.
The Top Control ON/OFF (fig. 1) is of modular construction, so that various
construction stages and electrical connection concepts can be provided.
Operating Instructions No. 801 872
Bürkert Steuer- und Regelungstechnik
Chr.-Bürkert-Str. 13-17
Service-Abteilung
D-76453 Ingelfingen
Tel.: (07940) 10-252
Fax: (07940) 10-428
The guarantee only covers faults in the Top Control ON/OFF
series, and in the integrated pneumatically-driven valve. No
liability will, however, be accepted for subsequent damage of
any kind that may arise as a result of the failure or incorrect
functioning of the device.
19