1
GENERAL INFORMATION
Please observe the information in these operating instructions, as well as the
operating conditions and permissible data specified in the date sheets of the
Top Control ON/OFF and of the relevant pneumatically actuated valve, to ensure
satisfactory operation of the unit and a long service life:
•
Follow general technical rules when planning the application and operation
of the unit!
•
Installation and maintenance may only be performed by technical personnel
provided with suitable tools!
•
Note the accident prevention and safety precautions applicable for electrical
units during operation and maintenance of the unit!
•
Always switch off the power supply before working on the system!
•
Take suitable measures to prevent inadvertent operation or impermissible
influences!
•
Ensure a defined and controlled re-start of the process following an
interruption of the electrical or pneumatic supply!
•
We cannot accept any liability if these instructions are ignored or
impermissible interventions are made in the unit and the warranty also
becomes invalid on units and accessories!
1.1
Scope of delivery
Check the contents of the delivery for damage and agreement with the details
specified on the delivery note immediately following receipt. This normally
comprises:
•
pneumatically actuated process valve of types 2000, 2030, 2031, 2031K,
2652 or 2655 with control head fitted of the Top Control series
•
operating instructions for the process valve with pneumatic drive
18
Top Control ON/OFF