Num'axes Canicom GPS Guide D'utilisation page 78

➢ Settings:
This menu is used to adjust your handheld's settings. From this menu, you can:
- Calibrate your compass
- Manage the backlight of the handheld display
- Manage the "Tracking" menu interface
- Restore the original settings
- Update the date and time
- Choose your language
Press the button "Select"
Calibrate your compass:
Highlight "Calibrate the compass" and validate your choice with the
back to the animation to calibrate your compass again cf. § Starting all geolocation/Step No.°1:
calibrate the compass.
Screensaver and backlight:
From this menu, you can select either an economic automatic mode or a mode with no screensaver.
Highlight the selected mode OK.
- In this menu you can choose:
Whether or not you want to set your screen to automatically sleep. This will save you battery or
no sleep mode.
- Change the brightness of your screen using the arrows from 1 to 5.
- Change the delay beyond which the screen goes to full standby (black screen. Delay 5-55
seconds).
To change one of the settings highlight it using the arrows
button "OK".
Guide Canicom GPS – Indice A
sub-menus
available from
Settings menu
Select
Settings
Confirm your choice with the
button "OK"
button "OK". This takes you
. Confirm your choice with the
78/257