CONTINENTAL EDISON CEMC900IN Guide D'utilisation page 47

Preparation:
1
Install your appliance on a flat, stable and
heat-resistant surface. Unwind the power
cable completely from its support.
Check that there is no liquid or residue on
the heating element of the appliance.
3
Place the bowl inside the multicooker and
ensure to position the bowl correctly.
5
Insert the connector into the appliance and
then plug the power cable into a main plug.
The device beeps with all the light indicators
on the control panel lighting up briefly.
2
Put your preparation in the bowl. Ensure to
respect the maximum "1.8L / 10 CUP" and
minimum "0.6L" marking of the bowl.
Thoroughly wipe the outside of the bowl
(especially the underside). Check that there
is no liquid or residue under the bowl.
4
Close the cover lid, ensure it's well locked
(an audible click will signal it).
6
The appliance enters standby mode with the
screen displaying "
lights off.
Select the pre-set cooking program or
personalized by yourself (refer to the Table
of cooking programs).
47
8888
" and the indicator