Technical Information; Set Up And Use; Before First Use - CONTINENTAL EDISON CEMC900IN Guide D'utilisation

II. TECHNICAL INFORMATION
Reference
Electrical parameters
Power

Before first use

Unpacking the appliance and disposing of the packaging elements:
Remove all packing materials that is protecting the appliance and the
protective elements inside the appliance compartments.
- The packing box and the papers sheets are recyclable. They must
be thrown in the collection bins provided for this purpose.
- The materials bearing the symbol
>PE<= polyethylene; >PS<= polystyrene; >PP<= polypropylene
This means that they can be recycled by depositors in appropriate collection
containers.
- The other packaging elements (adhesive, fasteners ...) must be thrown away
with household waste.
To know further: www.quefairedemesdechets.fr
• Wash all accessories with a sponge damped with dishwashing liquid.
Rinse throughly and dry them with a clean cloth.
• Clean the outer body with a dry clean cloth. Do not immerse the
appliance into water. Do not put the appliance into a dishwasher.
• Place your appliance on a flat, stable and heat resistant surface.
• Before first use, it is imperative to operate the appliance with the
« Vapeur » steam program in order to eliminate the fumes and odors that
normally emanate from a new appliance.
• Install your device on a flat, stable and heat-resistant surface.
• Fill the bowl with water up to the 1.0L mark indicated on the inside of the
tank and place the bowl inside the appliance. Close the cover of the
appliance.
• Connect the appliance to an earthed socket.
CEMC900IN (Modèle MPR50278A)
220-240V~50-60Hz
900W
III. SET UP AND USE
are recyclable:
44