GF 582 High Purity Manuel D'utilisation page 38

Instruction manual
 Install O-ring at manometer/adaptor
Manometer
WARNING – ONLY FOR ADAPTOR VERSION
Danger of material damage and/or injury due to changes of the
manometer! Valid for versions with adaptor.
 The manometer is installed, preset and checked at the factory.
Therefore, ensure that no changes are made at the manometer. Only
turn at the adaptor. Do not damage seal sticker.
 Remove covering cap and turn the manometer with/without adaptor with
threaded connection into the valve base part
 Turn in manometer/manometer with adaptor from contact, at least 360° up to
max. 720° (align scale). Maximum torque 2.5 Nm
38
Manometer with adaptor
Installation