Dirt Devil NAVIGATOR M608-0 Mode D'emploi page 35

1 Overview
1.2 Robot vacuum cleaner in detail
1
2
1 Side brush:
- conveys dust to the main brush
- may be pulled off for short pile carpet
cleaning
2 "Return to station" sensor:
- guides the appliance to the docking sta-
tion as soon as the battery capacity be-
comes low or it receives the respective
command from the remote control (
3 LED indicators:
- indicate if the dust bin is not in the robot
- indicate if the cliff sensor detects a cliff
- indicate if the bumper got stuck
- indicate if the motor is overloaded
- see also Chapter 7, "Troubleshooting"
3
2
)
5
4
4 "On/Off" key (
):
- switches the appliance on or off if
pressed longer than 1 second
- starts cleaning if the appliance is
switched on and pressed less than
1 second
5 Upper cover:
- covers dust bin module and
- covers battery compartment
6 Bumper:
- senses impact and causes the appli-
ance to bounce backwards
- if triggered constantly for 5 seconds or
longer the robot will stop automatically
6
35