Software Configuration - LENCO LS-50 Mode D'emploi

5. AUDACITY QUICK GUIDE (PC editing program)
Before Starting the Software
Make sure that your USB turntable is plugged into the computer and both the computer and the
turntable are plugged in and on.
To Install Software (PC)
1. Plug in your turntable to an AC outlet and connect the USB port on the Turntable to the USB
port of your computer.
2. Turn on the power switch to your turntable.
3. The Windows system will detect a new device and indicate that it is available to use.
4. Insert the CD that came with your USB turntable.
5. Run the file to install the Audacity software. Once installed, run the Audacity program.
To Install Software (MAC)
http://www.audacityteam.org
For MAC, please go to
software.

Software Configuration

1. Click on Microphone in the drop down menu and select "Stereo Mix"
Figure 1: Select Stereo Mix
2. Select the "Edit" menu and then "Preferences"
Select the USB audio device under the "Recording" selection as shown. Select "Software Playthrough"
to hear the audio while recording.
Note: The USB Turntable may show up with a different name in the Windows system. This may depend
on your computer model and operating system. 99% of the time it will contain "USB" in the Name.
and download the latest version of the MAC
8