Description of the rear panel
1. Switches the LED light effect on and off
2. Switches the unit on and off
3. AUX input to connect a smartphone or an MP3 player
4. 12Vdc input to charge the internal battery
5. Charging LED: lights up in red during charge and in green
when the battery is fully charged
Remote control
1. ON/OFF button
2. Mute
3. Repeat
4. VOL+
5. Play/pause
6. Previous/backwards
7. Next/Forward
8. VOL-
9. Stop
10. EQ (Pop, rock, jazz, classic)
11. No function
12. Input selector
13. Direct access
Press the MENU button on the unit and adjust the bass and treble via the remote control.
Charging the unit
Prior to using the unit for the first time, you need to charge the built-in battery.
Connect the supplied mains adaptor to the 12Vdc input socket on the rear panel and the built-in battery will start
charging. It takes about 3 hours to fully charge the battery.
Playing time: If the woofer illumination is switched on when playing music, the unit will work about 1 hour.
If the woofer illumination is switched off, it will work for about 2 hours.
Using the Microphone
1. Switch the unit on.
2. Plug the supplied microphone into the MIC1 or MIC2 socket on the top control panel.
3. Set the volume and the echo effect with the M.VOL and ECHO controls.
Using a wireless audio source
1. Switch the unit on.
2. Press the MENU button on the top control panel until "BT" is displayed.
3. Search for Bluetooth devices on your smartphone and select PARTY-SPEAKY in the list of found devices.
4. Now you are ready to play your music through the speaker. You can use the controls on your Bluetooth
device or on the speaker to set the volume
FM Function
1. Switch the unit on
2. Press the MENU button on the top panel until FM is displayed.
3. Keep the PLAY button pressed to start an auto search for FM radio stations. The found stations are
automatically stored in the memory. Use the and buttons to go to the last or to the next radio station.
©Copyright LOTRONIC 2017
PARTY-SPEAKY200
3