Sources Of Danger - Kemper KHS CoolFlow Manuel D'utilisation

EN
Danger!
Danger of fatal electric shock!
Work on live components entails an immediate
risk of a fatal electric shock.
• Have work carried out only by plumbing
specialists who have received training in
electrical installation work.
• Disconnect the system from the power supply
before starting work on it.
• Keep the working environment dry.
Warning!
Risk of injury due to improper installation!
Improper installation of the plumbing and electri-
cal parts can create a risk of injury.
• Installation, repair and maintenance may only
be carried out by a plumbing specialist.
• Follow the instructions and wiring diagrams
in this manual.
• Observe the requirements for performance,
dimensions and area of application specified
in the technical data.
• Observe all national and regional standards
and regulations on plumbing and electrical
installation and on accident prevention.
• Install the cold water chiller level and observe
the markings on the chiller.
Warning!
Health hazard from process medium!
Mixing of drinking and non-drinking water can result
in a danger to health.
• Observe the glycol manufacturer's instructions in
the safety data sheet.
Warning!
Health hazard from residues in supply lines!
After installation, addition of accessories or
maintenance work, there may be microbiological
residues in the supply lines.
• Always flush the supply lines in accordance
with DIN EN 806-5 and VDI/DVGW 6023 after
carrying out such work.
28/ 124 – K410061000000-00 / 03.2020 – © www.kemper-olpe.de

Sources of danger

Note!
Equipment damage due to frost!
The pipework may be damaged if exposed to
frost.
• Add anti-freeze to the process medium if
the cooling circuit is routed outdoors.
• Observe the maximum and minimum
operating temperatures.
Note!
Equipment damage due to water! Escaping
water or the formation of condensation can
lead to material damage to the cold water
chiller and its surroundings.
•
Shut off the pipework before starting
work on the system.
•
Inspect the components, seals and insu-
lation materials for proper function.
Note!
Equipment damage during transport! Protru-
ding parts can easily be damaged during
transport.
• Have the cold water chiller delivered as
close as possible to the intended instal-
lation location.
• Grasp the cold water chiller only by the
handles provided for transport and not
by the connections on the drinking water
side.
Note!
Equipment damage before commissioning!
Damage to the system can result in functional
limitations.
• Carry out a visual inspection for damage
before starting commissioning.