Tineco iFloor Série Mode D'emploi page 17

Brush Roller Self-cleaning
hold the switch button for 3s
Brush Roller Cover
Grab the front handle while pressing the
button and pull upward to remove.
Lock hole B
Lock hole A
Press hook A into the lock hole A, then Press
hook B into the lock hole B.
Place the appliance on the storage tray. The Clean
Water Tank should be at least 1/3 full of water.
Press and hold the switch button for 3s and begin
the self-cleaning process.
The appliance will automatically shut off once
finished.
The entire self-cleaning process takes about 40s.
Note:
• For optimal performance, use quick self-cleaning
function as often as needed.
• Please empty the Dirty Water Tank before and
after self-cleaning.
Rinse with water.
Hook B
Hook A
Always latch the brush cover into place to avoid
leakage.
15
click
②
①