Tineco iFloor Série Mode D'emploi page 16

Dirty Water Tank
• When dirty water reaches the Max line, the floater will block off the DWT and create a high pitched
sound indicating it's time to switch off the appliance.
• Pull up the tank lid to empty the DWT. Use the 3-in-1 cleaning tool to remove remaining debris.
Rinse the inside of the DWT and place back into the appliance.
Filter & Floater
If the filter and the floater have been blocked, rinse with water.
Remove the filter from the tank lid, remove the floater, and rinse both parts with water.
Pre-filter
Grasp recessed area on each side of the pre-filter and pull upward. Rinse under running water and
must be completely dry before recombining with the lid of the DWT.
* A spare sponge is provided with the Instruction Manual for convenient replacement.
14