Filling Clean Water Tank - Tineco iFloor Série Mode D'emploi

Filling Clean Water Tank

Press the Clean Water Tank release button to
remove it from the appliance.
Place the tank back into the appliance. You
should hear a "Click" if done correctly.
Emptying Dirty Water Tank
Press the Dirty Water Tank
release button to remove it
from the appliance.
click
Pour dirty water and debris out.
Tineco solution
Open the tank cap, fill the tank with tap water to
Max line. When deep cleaning is necessary, add
one bottle cap of solution to the CWT and tightly
close the cap.
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
Place the tank back until you
hear a click.
10
click