Pelgrim OSW1080RVS Notice D'utilisation page 36

USE
EN 6
Delayed shut off
1. Switch on the appliance and choose the fan setting desired.
2. Press the timer button.
▷ One audible signal sounds to confirm setting the timer.
▷ The extraction level remains at the selected setting for 10
minutes, after which the appliance is automatically switched Off.
3. Press the timer button again to switch Off the timer setting.
▷ Two audible signals sound to confirm canceling the timer.
Clean air function
1. Switch off the appliance and lighting.
2. Press and hold the clean air button untill the light alternates
between being on an off for 3 seconds. The lights will blink 2 times.
▷ The Clean air function is activated.
▷ The appliance will be switched On for 10 minutes every hour at
level 1.
3. Switch Off the clean air function by pressing the'+' or '-' button.
Filter saturation signal
• Three consecutive audible signals:
▷ Clean the grease filters
• Six consecutive audible signals:
▷ Replace or clean the carbon filters.
Resetting the saturation signal
1. Press the timer button.
▷ An audible signal sounds for 3 seconds.
▷ The saturation signal has been reset.
Note: The appliance switches Off the saturation signal automatically
after 20 hours.