Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Function
Icon on display
Lime scale removal.
Cleaning the tray
at the end of
the lime scale
removal process.
Something is not
working correctly.
N.B.
Comment
SELECT COFFEE/LIME SCALE REMOVAL. The coffee-maker will con-
tinue to make coffee but indicate that the lime scale needs to be
removed from the machine.
EMPTY THE DRIP TRAY AND FILL THE WATER TANK WITH CLEAN
WATER. The coffee-maker has finished removing the lime scale
from the pipes and has poured the removal agent on to the drip
tray, which is now full. First of all, empty it and then fill the water
tank with clean water for the rinse cycle.
RESET THE COFFEE-MAKER SOFTWARE by turning off the main
switch (position '0'), wait a few seconds and then turn it on again.
If, after turning off and turning on the coffee-maker, the symbol
continues, THE COFFEE-MAKER NEEDS TO BE REPAIRED AT AN AU-
THORISED TECHNICAL SERVICE CENTRE. The coffee-maker will not
work until it has been repaired.
When the situation has been corrected, the coffee-maker is again
ready to make coffee.
26
Publicité
Table des Matières
