Lime Scale Removal - SOLAC Espression Supremma CA4815 Mode D'emploi

10. The coffee-maker is ready to make coffee.
11. Place the cup with the frothy milk under the coffee out-
let.
12. Pour the coffee directly into the cup for a delicious cap-
puccino.

16 LIME SCALE REMOVAL

Lime scale should be removed regularly to clean the deposits
from the internal circuits of the coffee-maker. The frequency
with which your coffee-maker needs to be cleaned depends
on the hardness of the water you use. Consequently, you first
of all need to test the hardness of the water. To do this,
proceed as indicated in section 18 PROGRAMMING YOUR
COFFEE-MAKER.
IMPORTANT!! DO NOT USE VINEGAR OR ANY OTHER LIME
SCALE REMOVAL AGENT NOT SUPPLIED BY SOLAC UNDER
ANY CIRCUMSTANCES. You will find a sachet of lime scale re-
moval agent containing the exact amount for one removal
with the accessories to your coffee-maker.
1. The coffee-maker will indicate when the lime scale needs
to be removed from the circuits by displaying the follow-
ing symbols on the screen:
N.B. The lime scale removal process takes approximately 35
minutes and does not necessarily have to be carried out when
the coffee-maker displays the symbols. When this happens,
you can continue making coffee, but the appliance will indi-
cate the need for the lime scale removal. If this is not done, the
machine may become damaged.
2. Press the 'P' button to enter the programming menu.
3. Press the 'arrow' icon until the lime scale removal symbol is
displayed.
4. The lime scale removal symbol is displayed on the screen.
5. To select it, press the 'P' button again.
6. The coffee-maker tells you to fill the water tank before
beginning the lime scale removal process. Do not pour
water in yet; to remove the lime scale, you have to prepare
the removal solution.
7. Prepare the lime scale removal solution as indicated on the
sachet containing the removal agent supplied by Solac.
Pour the content into the water tank and add water up to
the lime scale removal mark on the tank.
8. Owing to the lengthiness of this process, you need to con-
firm that you want to carry it out at that time. Before con-
firming, make sure you have poured the removal agent
into the water tank.
12